Cảm biến áp suất IFM PN2599

• Hãng sản xuất: IFM
• Model:  PN2599
• Xuất xứ: EU
• Bảo hành: 12 Tháng

Thông số Cảm biến áp suất IFM PN2599

• Product characteristics
• Output signal    switching signal; analogue signal; IO-Link; (configurable)
• Measuring range    
• -1…1 bar    -1000…1000 mbar    -14.5…14.5 psi    -29.5…29.5 inHg    -401…401 inH2O    -100…100 kPa
• Process connection    threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5
• Application
• Special feature    Gold-plated contacts
• Measuring element    ceramic-capacitive pressure measuring cell
• Application    for industrial applications
• Media    liquids and gases
• Medium temperature [°C]    -25…80
• Min. bursting pressure    
• 30000 mbar    450 psi    3000 kPa
• Pressure rating    
• 10000 mbar    145 psi    1000 kPa
• Vacuum resistance [mbar]    -1000
• Type of pressure    relative pressure; vacuum
• Electrical data
• Operating voltage [V]    18…30 DC; (according to EN 50178 SELV/PELV)
• Current consumption [mA]    < 35
• Min. insulation resistance [MΩ]    100; (500 V DC)
• Protection class    III
• Reverse polarity protection    yes
• Power-on delay time [s]    0.3
• Integrated watchdog    yes
• Inputs / outputs
• Number of inputs and outputs    Number of digital outputs: 2; Number of analogue outputs: 1
• Outputs
• Total number of outputs    2
• Output signal    switching signal; analogue signal; IO-Link; (configurable)
• Electrical design    PNP/NPN
• Number of digital outputs    2
• Output function    normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]    2
• Permanent current rating of switching output DC [mA]    250
• Switching frequency DC [Hz]    < 500
• Number of analogue outputs    1
• Analogue current output [mA]    4…20; (scalable 1:5)
• Max. load [Ω]    500
• Analogue voltage output [V]    0…10; (scalable 1:5)
• Min. load resistance [Ω]    2000
• Short-circuit protection    yes
• Type of short-circuit protection    pulsed
• Overload protection    yes
• Measuring/setting range
• Measuring range    
• -1…1 bar    -1000…1000 mbar    -14.5…14.5 psi    -29.5…29.5 inHg    -401…401 inH2O    -100…100 kPa
• Analogue start point    
• -1000…600 mbar    -14.5…8.7 psi    -29.5…17.7 inHg    -402…240 inH2O    -100…60 kPa
• Analogue end point    
• -600…1000 mbar    -8.7…14.5 psi    -17.7…29.5 inHg    -240…402 inH2O    -60…100 kPa
• Factory setting / CMPT = 2
• Set point SP    
• -985…1000 mbar    -14.3…14.5 psi    -29.2…29.5 inHg    -396…402 inH2O    -98.5…100 kPa
• Reset point rP    
• -995…990 mbar    -14.45…14.4 psi    -29.4…29.3 inHg    -400…398 inH2O    -99.5…99 kPa
• Min. difference between SP and rP    
• 10 mbar    0.15 psi    0.3 inHg    4 inH2O    1 kPa
• In steps of    
• 5 mbar    0.05 psi    0.1 inHg    2 inH2O    0.5 kPa
• Status_B High Resolution / CMPT = 3
• Set point SP    
• -987…1000 mbar    -14.32…14.5 psi    -29.2…29.5 inHg    -396…401 inH2O    -98.7…100 kPa
• Reset point rP    
• -996…992 mbar    -14.44…14.38 psi    -29.4…29.3 inHg    -400…398 inH2O    -99.6…99.2 kPa
• Min. difference between SP and rP    
• 9 mbar    0.12 psi    0.3 inHg    4 inH2O    0.9 kPa
• In steps of    
• 1 mbar    0.01 psi    0.1 inHg    1 inH2O    0.1 kPa
• Accuracy / deviations
• Notes on the accuracy / deviation    switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%
• Switch point accuracy [% of the span]    < ± 0,4; (Turn down 1:1)
• Repeatability [% of the span]    < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
• Characteristics deviation [% of the span]    < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
• Hysteresis deviation [% of the span]    < ± 0,1; (Turn down 1:1)
• Long-term stability [% of the span]    < ± 0,05; (Turn down 1:1; per 6 months)
• Temperature coefficient zero point [% of the span / 10 K]    < ± 0,2; (-0…80 °C)
• Temperature coefficient span [% of the span / 10 K]    < ± 0,2; (-0…80 °C)
• Response times
• Response time [ms]    < 1.5
• Delay time programmable dS, dr [s]    0…50
• Damping for the switching output dAP [s]    0…4
• Damping for the analogue output dAA [s]    0…4
• Max. response time analogue output [ms]    3
• Software / programming
• Parameter setting options    hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output
• Interfaces
• Communication interface    IO-Link
• Transmission type    COM2 (38,4 kBaud)
• IO-Link revision    1.1
• SDCI standard    IEC 61131-9
• SIO mode    yes
• Required master port type    A; (wenn PIN 2 nicht verbunden: B)
• Supported DeviceIDs    
• Type of operation    DeviceID
• Factory setting / CMPT = 2    467
• Status_B High Resolution / CMPT = 3    983
• Note    
• For further information please see the IODD PDF file under “Downloads”
• Factory setting / CMPT = 2
• Profiles    Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
• Min. process cycle time [ms]    2.3
• IO-Link resolution pressure [mbar]    1
• IO-Link process data (cyclical)    
• function    bit length
• pressure    14
• binary switching information    2
• IO-Link functions (acyclical)    application specific tag
• Status_B High Resolution / CMPT = 3
• Profiles    Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)
• Min. process cycle time [ms]    3
• IO-Link resolution pressure [mbar]    1
• IO-Link process data (cyclical)    
• function    bit length
• pressure    14
• device status    4
• binary switching information    2
• IO-Link functions (acyclical)    application specific tag
• Operating conditions
• Ambient temperature [°C]    -25…80
• Storage temperature [°C]    -40…100
• Protection    IP 65; IP 67
• Mechanical data
• Weight [g]    263
• Materials    stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
• Materials (wetted parts)    stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM
• Min. pressure cycles    100 million
• Tightening torque [Nm]    25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating)
• Process connection    threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5
• Process connection sealing    FKM (to DIN 3869)
• Restrictor element integrated    no (can be retrofitted)
• Displays / operating elements
• Display    
• Display unit    5 x LED, green (mbar, psi, kPa, inH2O, inHg)
• switching status    2 x LED, yellow
• measured values    alphanumeric display, red/green 4-digit
• Remarks
• Pack quantity    1 pcs.
• Electrical connection
• Connection    Connector: 1 x M12; Contacts: gold-plated

Ngoài cung cấp Cảm biến áp suất IFM PN2599 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:

• Cảm biến nhiệt độ, độ ẩm
• Cảm biến hồng ngoại
• Cảm biến tiệm cận
• Cảm biến áp suất
• Cảm biến siêu âm
• Cảm biến rung
• Cảm biến gia tốc
• Cảm biến từ, điện dung
• Công tắc cảm biến dòng chảy
• Cảm biến quang, ánh sáng
• Cảm biến mực nước, chất lỏng, lưu lượng
• Vv,...

=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !

Liên hệ mua IFM PN2599 giá tốt !

Zalo & Skype: 0859.788.333 - 090.182.0011