Cảm biến lưu lượng IFM SB9232 (100 bar)

Cảm biến lưu lượng IFM SB9232

• Hãng sản xuất: IFM
• Model: SB9232
• Xuất xứ: EU
• Bảo hành: 12 tháng

Thông số Cảm biến lưu lượng IFM SB9232

• Product characteristics
• Process connection    threaded connection G 3/4 internal thread
• Temperature monitoring
• Measuring range    
• -10…100 °C    14…212 °F
• Application
• Special feature    Gold-plated contacts
• Media    Liquids; oil
• Note on media    
• oil with viscosity: 32 mm²/s (40 °C)
• Medium temperature [°C]    -10…100
• Pressure rating [bar]    100
• Pressure rating [Mpa]    10
• Note on pressure rating    
• at medium temperature >70°C: 80 bar / 8 MPa
• Electrical data
• Operating voltage [V]    18…30 DC; (according to EN 50178 SELV/PELV)
• Current consumption [mA]    < 50
• Protection class    III
• Reverse polarity protection    yes
• Power-on delay time [s]    < 3
• Outputs
• Total number of outputs    2
• Output signal    switching signal; analogue signal; frequency signal; IO-Link
• Max. voltage drop switching output DC [V]    2
• Max. current load per output [mA]    150; (200: …60 °C; Ambient temperature; 250: …40 °C; Ambient temperature)
• Analogue current output [mA]    4…20
• Max. load [Ω]    500
• Short-circuit protection    yes
• Overload protection    yes
• Frequency of the output [Hz]    0…10000
• Measuring/setting range
• Measuring range    
• 0.3…15 l/min    0.018…0.9 m³/h    4.8…237.8 gph    0.08…3.965 gpm
• Display range    
• 0…18 l/min    0…1.08 m³/h    0…285.4 gph    0…4.755 gpm
• Resolution    
• 0.01 l/min    0.001 m³/h    0.1 gph    0.001 gpm
• Set point SP    
• 0.1…15 l/min    0.006…0.9 m³/h    1.6…237.8 gph    0.025…3.965 gpm
• Reset point rP    
• 0…14.9 l/min    0…0.894 m³/h    0…236.2 gph    0…3.935 gpm
• Frequency end point, FEP    
• 1…15 l/min    0.06…0.9 m³/h    15.8…237.8 gph    0.265…3.965 gpm
• In steps of    
• 0.01 l/min    0.001 m³/h    0.2 gph    0.005 gpm
• Frequency at the end point FRP [Hz]    10…10000
• In steps of [Hz]    10
• Measuring dynamics    1:50
• Temperature monitoring
• Measuring range    
• -10…100 °C    14…212 °F
• Display range    
• -32…122 °C    -25.6…251.6 °F
• Resolution    
• 0.1 °C    0.1 °F
• Set point SP    
• -9.3…100 °C    15.2…212 °F
• Reset point rP    
• -10…99.3 °C    14…210.8 °F
• In steps of    
• 0.1 °C    0.2 °F
• Frequency start point, FSP    
• -10…78 °C    14…172.4 °F
• Frequency end point, FEP    
• 12…100 °C    53.6…212 °F
• Frequency at the end point FRP [Hz]    10…10000
• Accuracy / deviations
• Flow monitoring
• Accuracy (in the measuring range)    ± 5 % MEW; (Q > 1 l/min; 20…70 °C Medium temperature)
• Repeatability    ± 1 % MEW
• Temperature monitoring
• Temperature drift    0,029 °C / K
• Accuracy [K]    3 K (25°C; Q > 1 l/min)
• Response times
• Flow monitoring
• Response time [s]    0.01
• Damping for the switching output dAP [s]    0…5
• In steps of [s]    0.1
• Damping for the analogue output dAA [s]    0…5
• In steps of [s]    0.1
• Temperature monitoring
• Dynamic response T05 / T09 [s]    T09 = 120 (Q > 1 l/min)
• Software / programming
• Parameter setting options    hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor
• Interfaces
• Communication interface    IO-Link
• Transmission type    COM2 (38,4 kBaud)
• IO-Link revision    1.1
• SDCI standard    IEC 61131-9 CDV
• Profiles    Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
• SIO mode    yes
• Required master port type    A
• Process data analogue    2
• Process data binary    2
• Min. process cycle time [ms]    3.2
• Supported DeviceIDs    
• Type of operation    DeviceID
• Default    1043
• Operating conditions
• Ambient temperature [°C]    0…60
• Note on ambient temperature    
• medium temperature < 80 °C
• medium temperature < 100 °C: 0…40 °C
• Storage temperature [°C]    -15…80
• Protection    IP 65; IP 67
• Mechanical data
• Weight [g]    990.5
• Materials    stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
• Materials (wetted parts)    stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
• Process connection    threaded connection G 3/4 internal thread
• Switching cycles mechanical    10 million
• Displays / operating elements
• Display    
• Display unit    6 x LED, green
• switching status    2 x LED, yellow
• measured values    alphanumeric display, red/green alternating indication 4-digit
• programming    alphanumeric display, 4-digit
• Remarks
• Remarks    
• Recommendation: use a 200-micron filter.
• All data refer to oil with the following nominal viscosity:
• 32 cSt, 40 °C ± 3 K
• MW = measured value
• MEW = Final value of the measuring range
• Pack quantity    1 pcs.
• Electrical connection
• Connection    Connector: 1 x M12; Contacts: gold-plated

Ngoài cung cấp Cảm biến lưu lượng IFM SB9232 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:

• Cảm biến nhiệt độ, độ ẩm
• Cảm biến hồng ngoại
• Cảm biến tiệm cận
• Cảm biến áp suất
• Cảm biến siêu âm
• Cảm biến rung
• Cảm biến gia tốc
• Cảm biến từ, điện dung
• Công tắc cảm biến dòng chảy
• Cảm biến quang, ánh sáng
• Cảm biến mực nước, chất lỏng, lưu lượng
• Vv,...

=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !

Liên hệ mua IFM SB9232 giá tốt !

Zalo & Skype: 0859.788.333 - 090.182.0011