Cảm biến lưu lượng IFM SBY234 (40 bar)

Cảm biến lưu lượng IFM SBY234

• Hãng sản xuất: IFM
• Model: SBY234
• Xuất xứ: EU
• Bảo hành: 12 tháng

Thông số Cảm biến lưu lượng IFM SBY234

• Product characteristics
• Number of inputs and outputs    Number of digital outputs: 2; Number of analogue outputs: 1
• Process connection    threaded connection Rp 3/4 internal thread
• Temperature monitoring
• Measuring range [°C]    -10…100
• Application
• Special feature    Gold-plated contacts
• Application    for industrial applications
• Media    water; glycol solutions; coolants; oil
• Note on media    
• oil 1 with viscosity: 10 mm²/s (40 °C)
• oil 2 with viscosity: 46 mm²/s (40 °C)
• Medium temperature [°C]    -10…100
• Pressure rating [bar]    40
• Pressure rating [Mpa]    4
• MAWP (for applications according to CRN) [bar]    40
• Electrical data
• Operating voltage [V]    18…30 DC; (according to EN 50178 SELV/PELV)
• Current consumption [mA]    < 50
• Protection class    III
• Reverse polarity protection    yes
• Power-on delay time [s]    < 3
• Inputs / outputs
• Number of inputs and outputs    Number of digital outputs: 2; Number of analogue outputs: 1
• Outputs
• Total number of outputs    2
• Output signal    switching signal; analogue signal; frequency signal; IO-Link; (configurable)
• Number of digital outputs    2
• Output function    normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]    2
• Permanent current rating of switching output DC [mA]    150; (per output 2 x 200 (…60 °C); 2 x 250 (…40 °C))
• Switching cycles (mechanical)    10 million
• Number of analogue outputs    1
• Analogue current output [mA]    4…20
• Max. load [Ω]    500
• Short-circuit protection    yes
• Overload protection    yes
• Frequency of the output [Hz]    0…10000
• Measuring/setting range
• Measuring range    
• 1…50 l/min    0.06…3 m³/h
• Display range    
• 0…60 l/min    0…3.6 m³/h
• Resolution    
• 0.5 l/min    0.01 m³/h
• Set point SP    
• 0.5…50 l/min    0.02…3 m³/h
• Reset point rP    
• 0…49.5 l/min    0…2.98 m³/h
• Frequency end point, FEP    
• 3.5…50 l/min    0.2…3 m³/h
• In steps of    
• 0.5 l/min    0.01 m³/h
• Frequency at the end point FRP [Hz]    10…10000
• Measuring dynamics    1:50
• Temperature monitoring
• Measuring range [°C]    -10…100
• Display range [°C]    -32…122
• Resolution [°C]    1
• Set point SP [°C]    -9…100
• Reset point rP [°C]    -10…99
• In steps of [°C]    1
• Frequency start point, FSP [°C]    -10…78
• Frequency end point, FEP [°C]    12…100
• Frequency at the end point FRP [Hz]    10…10000
• Accuracy / deviations
• Flow monitoring
• Accuracy (in the measuring range)    ± (4 % MW + 1 % MEW); (Q > 1 l/min; medium and operating temperature: +22 °C ± 4K)
• Repeatability    ± 1 % MEW
• Temperature monitoring
• Temperature drift    0,029 °C / K
• Accuracy [K]    3 K (25°C; Q > 1 l/min)
• Response times
• Flow monitoring
• Response time [s]    0.01
• Damping for the switching output dAP [s]    0…5
• Damping for the analogue output dAA [s]    0…5
• Temperature monitoring
• Dynamic response T05 / T09 [s]    T09 = 120 (Q > 1 l/min)
• Software / programming
• Parameter setting options    hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour
• Interfaces
• Communication interface    IO-Link
• Transmission type    COM2 (38,4 kBaud)
• IO-Link revision    1.1
• SDCI standard    IEC 61131-9 CDV
• Profiles    Smart Sensor: Process Data Variable; Device Identification
• SIO mode    yes
• Required master port type    A
• Process data analogue    2
• Process data binary    2
• Min. process cycle time [ms]    5
• Supported DeviceIDs    
• Type of operation    DeviceID
• Default    562
• Operating conditions
• Ambient temperature [°C]    0…60
• Note on ambient temperature    
• medium temperature < 80 °C
• medium temperature < 100 °C: 0…40 °C
• Storage temperature [°C]    -15…80
• Protection    IP 65; IP 67
• Mechanical data
• Weight [g]    684
• Materials    stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
• Materials (wetted parts)    stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
• Process connection    threaded connection Rp 3/4 internal thread
• Displays / operating elements
• Display    
• Display unit    3 x LED, green
• switching status    2 x LED, yellow
• measured values    alphanumeric display, red/green 4-digit
• programming    alphanumeric display, 4-digit
• Remarks
• Remarks    
• Recommendation: use a 200-micron filter.
• All data refer to water (20 °C).
• MW = measured value
• MEW = Final value of the measuring range
• Pack quantity    1 pcs.
• Electrical connection
• Connection    Connector: 1 x M12; Contacts: gold-plated

Ngoài cung cấp Cảm biến lưu lượng IFM SBY234 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:

• Cảm biến nhiệt độ, độ ẩm
• Cảm biến hồng ngoại
• Cảm biến tiệm cận
• Cảm biến áp suất
• Cảm biến siêu âm
• Cảm biến rung
• Cảm biến gia tốc
• Cảm biến từ, điện dung
• Công tắc cảm biến dòng chảy
• Cảm biến quang, ánh sáng
• Cảm biến mực nước, chất lỏng, lưu lượng
• Vv,...

=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !

Liên hệ mua IFM SBY234 giá tốt !

Zalo & Skype: 0859.788.333 - 090.182.0011