Cảm biến lưu lượng IFM SU9004 (16 bar)

Giá bán: 100 đ (Giá chưa VAT)

Hãng sản xuất : IFM
Model : SU9004
Bảo hành : 12 Tháng
Xuất xứ : EU

Yêu cầu báo giá

Gọi để có giá tốt

Sales Engineer - Mr. Minh Quang: 0859.788.333
Sales Engineer - Mr Quân: 0972.124.827
Sales Engineer - Mr. Văn Hải: 0901.82.00.11
Hỗ trợ kỹ thuật: 0367.509.634

Lợi ích mua hàng

✔️Sản phẩm chính hãng 100%
✔️Giá luôn tốt nhất
✔️Tư vấn chuyên nghiệp chuyên sâu
✔️Giao hàng tận nơi trên toàn quốc
✔️Bảo hành & sửa chữa tận tâm

CÔNG TY TNHH TM VÀ CÔNG NGHỆ QTECH - HÀ NỘI OFFICE

Số 4, ngõ 32, tổ 13, phố Sài Đồng, phường Sài Đồng, Long Biên, TP Hà Nội

HỒ CHÍ MINH OFFICE

Số 32 đường TL57, Phường Thạnh Lộc, Quận 12, TP HCM

Hotline: 0859.788.333 - 0972.124.827

Thông tin chi tiết
Tài liệu hướng dẫn

Chi tiết

Cảm biến lưu lượng IFM SU9004

Hãng sản xuất: IFM
Model: SU9004
Xuất xứ: EU
Bảo hành: 12 tháng

Thông số Cảm biến lưu lượng IFM SU9004

Product characteristics
Number of inputs and outputs Number of analogue outputs: 2
Measuring range
0…200 l/min 0…52.84 gpm
Process connection threaded connection G 1 1/4 flat seal
Application
Special feature Gold-plated contacts
Application for industrial applications
Installation connection to pipe by means of an adapter
Media water; glycol solutions; coolants; oil
Note on media
low-viscosity oils with viscosity: 7…40 mm²/s (40 °C)
high-viscosity oils with viscosity: 30…68 mm²/s (40 °C)
Medium temperature [°C] -10…80
Pressure rating [bar] 16
Pressure rating [Mpa] 1.6
Electrical data
Operating voltage [V] 19…30 DC; (according to EN 50178 SELV/PELV)
Current consumption [mA] 100
Min. insulation resistance [MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 10
Inputs / outputs
Number of inputs and outputs Number of analogue outputs: 2
Outputs
Total number of outputs 2
Output signal analogue signal
Number of analogue outputs 2
Analogue current output [mA] 4…20; (scalable)
Max. load [Ω] 500
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
Measuring/setting range
Measuring range
0…200 l/min 0…52.84 gpm
Display range
0…240 l/min 0…63.42 gpm
Resolution
0.1 l/min 0.02 gpm
Analogue start point ASP
0…160 l/min 0…42.28 gpm
Analogue end point AEP
40…200 l/min 10.28…52.84 gpm
Max. flow rate [l/min] 220
In steps of
0.1 l/min 0.02 gpm
Temperature monitoring
Measuring range [°C] -10…80
Resolution [°C] 0.2
Analogue start point [°C] -10…62
Analogue end point [°C] 8…80
In steps of [°C] 0.2
Accuracy / deviations
Flow monitoring
Accuracy (in the measuring range) < ± (3 % MW + 0,2 % MEW) / < ± (8 % MW + 0,5 % MEW); (water; glycol: 35%; oil: viscosity 68 mm²/s at 40 °C)
Repeatability 1 l/min; 60 l/h; 0,05 gpm; 3 gph
Temperature monitoring
Accuracy [K] ± 3 (Q > 20 l/min)
Response times
Flow monitoring
Response time [s] 0.25; (dAP = 0)
Damping for the switching output dAP [s] 0…1
Temperature monitoring
Dynamic response T05 / T09 [s] T09 = 30 (Q > 20 l/min); (water)
Operating conditions
Ambient temperature [°C] -10…60
Storage temperature [°C] -25…80
Protection IP 67
Mechanical data
Weight [g] 1883
Materials housing: AlMgSi0,5 anodised; Sealing: FKM; connector housing: brass Optalloy-plated; PA 6.6; cover film: PA
Materials (wetted parts) stainless steel (1.4404 / 316L); FKM; PPS; Centellen 200
Process connection threaded connection G 1 1/4 flat seal
Displays / operating elements
Display
Display unit 6 x LED, green (l/min, m³/h, gpm, gph, °C, °F)
measured values alphanumeric display, 4-digit
programming alphanumeric display, 4-digit
Display unit l/min; m³/h; gpm; gph; °C; °F
Accessories
Accessories (supplied)
sealings: 2, Centellen
Accessories (optional)
adapter for pipe: 1 x R 1, stainless steel, E40205
adapter for pipe: 1 x 1″ NPT, stainless steel, E40206
Remarks
Remarks
sealing: only with supplied Centellen seals
MW = measured value
MEW = Final value of the measuring range
Pack quantity 1 pcs.
Electrical connection
Connection Connector: 1 x M12; Moulded body: brass, Optalloy-plated; Contacts: gold-plated