Cảm biến áp suất IFM PV7701 (0…25 MPa)

Giá bán: 100 đ (Giá chưa VAT)
Gọi để có giá tốt
  • Sales Engineer - Mr. Minh Quang: 0859.788.333
  • Sales Engineer - Mr Quân: 0972.124.827
  • Sales Engineer - Mr. Văn Hải: 0901.82.00.11
  • Hỗ trợ kỹ thuật: 0367.509.634
Lợi ích mua hàng

✔️Sản phẩm chính hãng 100% 
✔️Giá luôn tốt nhất
✔️Tư vấn chuyên nghiệp chuyên sâu
✔️Giao hàng tận nơi trên toàn quốc 
✔️Bảo hành & sửa chữa tận tâm

  • CÔNG TY TNHH TM VÀ CÔNG NGHỆ QTECH - HÀ NỘI OFFICE

    Số 4, ngõ 32, tổ 13, phố Sài Đồng, phường Sài Đồng, Long Biên, TP Hà Nội

    HỒ CHÍ MINH OFFICE

    Số 32 đường TL57, Phường Thạnh Lộc, Quận 12, TP HCM

    Hotline: 0859.788.333 - 0972.124.827

Chi tiết

Cảm biến áp suất IFM PV7701

  • Hãng sản xuất: IFM
  • Model: PV7701
  • Xuất xứ: EU
  • Bảo hành: 12 Tháng

Thông số Cảm biến áp suất IFM PV7701

  • Product characteristics
  • Output signal    switching signal; IO-Link; (configurable)
  • Measuring range [MPa]    0…25
  • Process connection    threaded connection R 1/4 external thread internal thread:M5
  • Application
  • Measuring element    metallic thin film cell
  • Application    for industrial applications
  • Media    liquids and gases
  • Medium temperature [°C]    -40…90
  • Min. bursting pressure [MPa]    120
  • Pressure rating [Mpa]    62.5
  • Note on pressure rating    
  • static
  • Vacuum resistance [mbar]    -1000
  • Type of pressure    relative pressure
  • Electrical data
  • Operating voltage [V]    18…30 DC
  • Current consumption [mA]    < 15
  • Min. insulation resistance [MΩ]    100; (500 V DC)
  • Protection class    III
  • Reverse polarity protection    yes
  • Power-on delay time [s]    < 0.3
  • Inputs / outputs
  • Number of inputs and outputs    Number of digital outputs: 2
  • Outputs
  • Total number of outputs    2
  • Output signal    switching signal; IO-Link; (configurable)
  • Electrical design    PNP/NPN
  • Number of digital outputs    2
  • Output function    normally open / normally closed; (parameterisable)
  • Max. voltage drop switching output DC [V]    2
  • Permanent current rating of switching output DC [mA]    100
  • Switching frequency DC [Hz]    < 170
  • Short-circuit protection    yes
  • Type of short-circuit protection    pulsed
  • Overload protection    yes
  • Measuring/setting range
  • Measuring range [MPa]    0…25
  • Set point SP [MPa]    0.25…25
  • Reset point rP [MPa]    0.13…24.88
  • In steps of [MPa]    0.01
  • Factory setting    
  • SP1 = 6.25 MPa    rP1 = 5.75 MPa    ou1 = Hno;
  • SP2 = 18.75 MPa    rP2 = 18.25 MPa    ou2 = Hno;
  • dS1/dS2 = 0 ms    dr1/dr2 = 0 ms    
  • coF = 0 %    P-n = PnP    dAP= 60 ms
  • Accuracy / deviations
  • Switch point accuracy [% of the span]    < ± 0,5 (nach DIN EN 61298-2)
  • Repeatability [% of the span]    < ± 0,05; (with temperature fluctuations < 10 K)
  • Characteristics deviation [% of the span]    < ± 0,5 (nach DIN EN 61298-2); (incl. drift when overtightened, zero point and span error, non-linearity, hysteresis)
  • Linearity deviation [% of the span]    < ± 0,1 (BFSL) / < ± 0,2 (LS)
  • Hysteresis deviation [% of the span]    < ± 0,2
  • Long-term stability [% of the span]    < ± 0,1; (per 6 months)
  • Temperature coefficient zero point [% of the span / 10 K]    < 0,1 (-25…90 °C) / < 0,2 (-40…-25 °C)
  • Temperature coefficient span [% of the span / 10 K]    < 0,1 (-25…90 °C) / < 0,2 (-40…-25 °C)
  • Response times
  • Response time [ms]    < 3
  • Software / programming
  • Parameter setting options    hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping
  • Interfaces
  • Communication interface    IO-Link
  • Transmission type    COM2 (38,4 kBaud)
  • IO-Link revision    1.1
  • SDCI standard    IEC 61131-9
  • Profiles    Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
  • SIO mode    yes
  • Required master port type    A
  • Process data analogue    2
  • Process data binary    2
  • Min. process cycle time [ms]    5
  • Supported DeviceIDs    
  • Type of operation    DeviceID
  • Default    781
  • Operating conditions
  • Ambient temperature [°C]    -40…90
  • Storage temperature [°C]    -40…100
  • Protection    IP 67; IP 69K
  • Mechanical data
  • Weight [g]    63.1
  • Materials    1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI
  • Materials (wetted parts)    stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630)
  • Min. pressure cycles    60 million; (at 1.2 times nominal pressure)
  • Tightening torque [Nm]    50; (recommended tightening torque; depends on lubrication, seal and pressure rating)
  • Process connection    threaded connection R 1/4 external thread internal thread:M5
  • Restrictor element integrated    yes
  • Remarks
  • Remarks    
  • BFSL = Best Fit Straight Line
  • LS = limit value setting
  • Pack quantity    1 pcs.
  • Electrical connection
  • Connection    Connector: 1 x M12

Ngoài cung cấp Cảm biến áp suất IFM PV7701 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:

  • Cảm biến nhiệt độ, độ ẩm
  • Cảm biến hồng ngoại
  • Cảm biến tiệm cận
  • Cảm biến áp suất
  • Cảm biến siêu âm
  • Cảm biến rung
  • Cảm biến gia tốc
  • Cảm biến từ, điện dung
  • Công tắc cảm biến dòng chảy
  • Cảm biến quang, ánh sáng
  • Cảm biến mực nước, chất lỏng, lưu lượng
  • Vv,...

=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !

Liên hệ mua IFM PV7701 giá tốt !

Zalo & Skype: 0859.788.333 - 090.182.0011

0
0 Đánh giá
Bạn đánh giá sao sản phẩm này?
Đánh giá ngay

Sản phẩm đã xem