Cảm biến lưu lượng IFM SA4310 (50 bar)

Cảm biến lưu lượng IFM SA4310

• Hãng sản xuất: IFM
• Model: SA4310
• Xuất xứ: EU
• Bảo hành: 12 tháng

Thông số Cảm biến lưu lượng IFM SA4310

• Product characteristics
• Number of inputs and outputs    Number of digital outputs: 2; Number of analogue outputs: 1
• Process connection    diameter Ø 8 mm
• Application
• Special feature    Gold-plated contacts
• Media    water; glycol solutions; air; oils
• Note on media    
• low-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F)
• high-viscosity oils with viscosity: > 40 mm²/s (104 °F)
• Medium temperature [°F]    -4…212
• Pressure rating [bar]    50
• Pressure rating [psi]    725
• MAWP (for applications according to CRN) [bar]    50
• Electrical data
• Operating voltage [V]    18…30 DC
• Current consumption [mA]    < 100
• Protection class    III
• Reverse polarity protection    yes
• Power-on delay time [s]    10
• Inputs / outputs
• Number of inputs and outputs    Number of digital outputs: 2; Number of analogue outputs: 1
• Outputs
• Total number of outputs    2
• Output signal    switching signal; analogue signal; frequency signal; IO-Link; (configurable)
• Electrical design    PNP/NPN
• Number of digital outputs    2
• Output function    normally open / normally closed; (parameterisable)
• Max. voltage drop switching output DC [V]    2.5
• Permanent current rating of switching output DC [mA]    250
• Number of analogue outputs    1
• Analogue current output [mA]    4…20; (scalable)
• Max. load [Ω]    350
• Short-circuit protection    yes
• Type of short-circuit protection    pulsed
• Overload protection    yes
• Frequency of the output [Hz]    0…1000
• Measuring/setting range
• Probe length L [mm]    200
• Operating mode    relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended)
• Note on factory setting    
• Operating mode: relative
• Liquids
• Setting range [ft/s]    0…19.5
• Greatest sensitivity [ft/s]    0.15…9.85
• Gases
• Setting range [ft/s]    0…656
• Greatest sensitivity [ft/s]    6…328
• Temperature monitoring
• Measuring range [°F]    -4…212
• Resolution [°F]    0.5
• Accuracy / deviations
• Flow monitoring
• Temperature drift [cm/s x 1/K]    0,01 fps x 1/K (< 68 °F; > 158 °F)
• Temperature gradient [K/min]    100
• Accuracy    ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions :; water: 68…158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
• Repeatability    0,05 m/s; (water; flow velocity: 0,05…3 m/s)
• Temperature monitoring
• Temperature drift    ± 0,003 K/°F
• Accuracy [K]    ± 0,3 / ± 1; (water; flow velocity: 1…9,85 fps / air; flow velocity: > 32,8 fps)
• Response times
• Flow monitoring
• Response time [s]    0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
• Temperature monitoring
• Dynamic response T05 / T09 [s]    1,5 (T09); (water; flow velocity: 1…9,85 fps)
• Software / programming
• Parameter setting options    hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
• Interfaces
• Communication interface    IO-Link
• Transmission type    COM2 (38,4 kBaud)
• IO-Link revision    1.1
• SDCI standard    IEC 61131-9
• Profiles    Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
• SIO mode    yes
• Required master port type    A
• Process data analogue    2
• Process data binary    2
• Min. process cycle time [ms]    3
• Supported DeviceIDs    
• Type of operation    DeviceID
• Factory setting / ModE = (REL)    537
• ModE = (LIQU)    544
• ModE = (GAS)    551
• Operating conditions
• Ambient temperature [°F]    -40…176
• Storage temperature [°F]    -40…212
• Protection    IP 65; IP 67
• Mechanical data
• Weight [g]    344.5
• Materials    stainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30
• Materials (wetted parts)    stainless steel (1.4404 / 316L)
• Process connection    diameter Ø 8 mm
• Displays / operating elements
• Display    
• Display unit    6 x LED, green (%, fps, gpm, cfm, °F, 10³)
• switching status    2 x LED, yellow
• measured values    alphanumeric display, red/green 4-digit
• Remarks
• Remarks    
• MW = measured value
• MEW = Final value of the measuring range
• Pack quantity    1 pcs.
• Electrical connection
• Connection    Connector: 1 x M12; Contacts: gold-plated

Ngoài cung cấp Cảm biến lưu lượng IFM SA4310 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:

• Cảm biến nhiệt độ, độ ẩm
• Cảm biến hồng ngoại
• Cảm biến tiệm cận
• Cảm biến áp suất
• Cảm biến siêu âm
• Cảm biến rung
• Cảm biến gia tốc
• Cảm biến từ, điện dung
• Công tắc cảm biến dòng chảy
• Cảm biến quang, ánh sáng
• Cảm biến mực nước, chất lỏng, lưu lượng
• Vv,...

=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !

Liên hệ mua IFM SA4310 giá tốt !

Zalo & Skype: 0859.788.333 - 090.182.0011