✔️Sản phẩm chính hãng 100%
✔️Giá luôn tốt nhất
✔️Tư vấn chuyên nghiệp chuyên sâu
✔️Giao hàng tận nơi trên toàn quốc
✔️Bảo hành & sửa chữa tận tâm
Cảm biến lưu lượng IFM SM2000 (16 bar)
Giá bán:
100 đ
(Giá chưa VAT)
- Hãng sản xuất : IFM
- Model : SM2000
- Bảo hành : 12 Tháng
- Xuất xứ : EU
Gọi để có giá tốt
- Sales Engineer - Mr. Minh Quang: 0859.788.333
- Sales Engineer - Mr Quân: 0972.124.827
- Sales Engineer - Mr. Văn Hải: 0901.82.00.11
- Hỗ trợ kỹ thuật: 0367.509.634
Lợi ích mua hàng
Chi tiết
Cảm biến lưu lượng IFM SM2000
- Hãng sản xuất: IFM
- Model: SM2000
- Xuất xứ: EU
- Bảo hành: 12 tháng
Thông số Cảm biến lưu lượng IFM SM2000
- Product characteristics
- Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
- Measuring range
- 5…600 l/min 0.3…36 m³/h
- Process connection threaded connection G 2 DN50 flat seal
- Application
- Special feature Gold-plated contacts
- Application totaliser function; empty pipe detection; for industrial applications
- Installation connection to pipe by means of an adapter
- Media conductive liquids; water; hydrous media
- Note on media
- conductivity: ≥ 20 µS/cm
- viscosity: < 70 mm²/s (40 °C)
- Medium temperature [°C] -10…70
- Pressure rating [bar] 16
- Pressure rating [Mpa] 1.6
- MAWP (for applications according to CRN) [bar] 16.5
- Electrical data
- Operating voltage [V] 18…32 DC; (according to EN 50178 SELV/PELV)
- Current consumption [mA] < 150
- Protection class III
- Reverse polarity protection yes
- Power-on delay time [s] 5
- Inputs / outputs
- Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
- Inputs
- Inputs counter reset
- Outputs
- Total number of outputs 2
- Output signal switching signal; analogue signal; pulse signal; frequency signal; IO-Link; (configurable)
- Electrical design PNP/NPN
- Number of digital outputs 2
- Output function normally open / normally closed; (parameterisable)
- Max. voltage drop switching output DC [V] 2
- Permanent current rating of switching output DC [mA] 250; (per output)
- Number of analogue outputs 1
- Analogue current output [mA] 4…20; (scalable)
- Max. load [Ω] 500
- Analogue voltage output [V] 0…10; (scalable)
- Min. load resistance [Ω] 2000
- Pulse output flow rate meter
- Short-circuit protection yes
- Type of short-circuit protection pulsed
- Overload protection yes
- Frequency of the output [Hz] 0.1…10000
- Measuring/setting range
- Measuring range
- 5…600 l/min 0.3…36 m³/h
- Display range
- -720…720 l/min -43.2…43.2 m³/h
- Resolution
- 0.5 l/min 0.02 m³/h
- Set point SP
- 8…600 l/min 0.5…36 m³/h
- Reset point rP
- 5…597 l/min 0.3…35.8 m³/h
- Analogue start point ASP
- 0…480 l/min 0…28.8 m³/h
- Analogue end point AEP
- 120…600 l/min 7.2…36 m³/h
- Low flow cut-off LFC
- < 15 l/min < 0.9 m³/h
- In steps of
- 0.5 l/min 0.02 m³/h
- Measuring dynamics 1:120
- Volumetric flow quantity monitoring
- Pulse value 0.0001…600 x 10³ m³
- In steps of 0.0001 m³
- Pulse length [s] 0,008…2
- Temperature monitoring
- Measuring range [°C] -20…80
- Display range [°C] -40…100
- Resolution [°C] 0.2
- Set point SP [°C] -19.2…80
- Reset point rP [°C] -19.6…79.6
- Analogue start point [°C] -20…60
- Analogue end point [°C] 0…80
- In steps of [°C] 0.2
- Accuracy / deviations
- Flow monitoring
- Accuracy (in the measuring range) ± (0,8 % MW + 0,5 % MEW)
- Repeatability ± 0,2% MEW
- Temperature monitoring
- Temperature drift ± 0,0333 °C / K
- Accuracy [K] ± 1 (bei 25 °C, Q > 15 l/min)
- Response times
- Flow monitoring
- Response time [s] 0.35; (dAP = 0)
- Delay time programmable dS, dr [s] 0…50
- Damping for the switching output dAP [s] 0…5
- Temperature monitoring
- Dynamic response T05 / T09 [s] T09 = 3 (Q > 15 l/min)
- Software / programming
- Parameter setting options Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/frequency/pulse output; start-up delay; display can be deactivated; Display unit; empty pipe detection
- Interfaces
- Communication interface IO-Link
- Transmission type COM2 (38,4 kBaud)
- IO-Link revision 1.1
- SDCI standard IEC 61131-9 CDV
- Profiles Smart Sensor: Process Data Variable; Device Identification
- SIO mode yes
- Required master port type A
- Process data analogue 3
- Process data binary 2
- Min. process cycle time [ms] 5
- Supported DeviceIDs
- Type of operation DeviceID
- Default 389
- Operating conditions
- Ambient temperature [°C] -10…60
- Storage temperature [°C] -25…80
- Protection IP 65; IP 67
- Mechanical data
- Weight [g] 3178
- Materials stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U
- Materials (wetted parts) stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; Centellen; FKM
- Process connection threaded connection G 2 DN50 flat seal
- Displays / operating elements
- Display
- Display unit 6 x LED, green (l/min, m³/h, l, m³, 10³, °C)
- switching status 2 x LED, yellow
- measured values alphanumeric display, 4-digit
- programming alphanumeric display, 4-digit
- Accessories
- Accessories (supplied)
- sealings: 2, Centellen
- Label
- Remarks
- Remarks
- MW = measured value
- MEW = Final value of the measuring range
- Pack quantity 1 pcs.
- Electrical connection
- Connection Connector: 1 x M12; Contacts: gold-plated
Ngoài cung cấp Cảm biến lưu lượng IFM SM2000 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như:
- Cảm biến nhiệt độ, độ ẩm
- Cảm biến hồng ngoại
- Cảm biến tiệm cận
- Cảm biến áp suất
- Cảm biến siêu âm
- Cảm biến rung
- Cảm biến gia tốc
- Cảm biến từ, điện dung
- Công tắc cảm biến dòng chảy
- Cảm biến quang, ánh sáng
- Cảm biến mực nước, chất lỏng, lưu lượng
- Vv,...
=> XEM CHI TIẾT SẢN PHẨM VÀ GIÁ BÁN TẠI ĐÂY !
Liên hệ mua IFM SM2000 giá tốt !
Zalo & Skype: 0859.788.333 - 090.182.0011
Bạn đánh giá sao sản phẩm này?
Đánh giá ngay