Thiết bị kiểm tra điện áp và thông mạch Amprobe VPC-12

Giá bán: Liên hệ

Hãng sản xuất : Amprobe
Model : VPC-12
Bảo hành : 12 Tháng
Xuất xứ :

Yêu cầu báo giá

Gọi để có giá tốt

Sales Engineer - Mr. Minh Quang: 0859.788.333
Sales Engineer - Mr Quân: 0972.124.827
Sales Engineer - Mr. Văn Hải: 0901.82.00.11
Hỗ trợ kỹ thuật: 0367.509.634

Lợi ích mua hàng

✔️Sản phẩm chính hãng 100%
✔️Giá luôn tốt nhất
✔️Tư vấn chuyên nghiệp chuyên sâu
✔️Giao hàng tận nơi trên toàn quốc
✔️Bảo hành & sửa chữa tận tâm

CÔNG TY TNHH TM VÀ CÔNG NGHỆ QTECH - HÀ NỘI OFFICE

Số 4, ngõ 32, tổ 13, phố Sài Đồng, phường Sài Đồng, Long Biên, TP Hà Nội

HỒ CHÍ MINH OFFICE

Số 32 đường TL57, Phường Thạnh Lộc, Quận 12, TP HCM

Hotline: 0859.788.333 - 0972.124.827

Thông tin chi tiết
Tài liệu hướng dẫn

Chi tiết

Thiết bị kiểm tra điện áp và thông mạch Amprobe VPC-12

Hãng sản xuất: Amprobe
Mã sản xuất: VPC-12
Bảo hành: 12 tháng

Thông số kỹ thuật của Amprobe VPC-12

Amprobe’s hand-held residential and commercial Voltage and Continuity Tester is loaded with safety, time-saving and accuracy features. It allows you to quickly troubleshoot voltage and continuity for residential and commercial applications using visual, audible and tactile alerts.
What can I do with it?
You can quickly measure ac and dc voltage in circuitry and its components—including outlets, light fixtures, batteries and extension cords— as well as test the continuity of fuses, light bulbs and electrical connections. In addition to full range polarity detection, the VPC-12 signals continuity and voltage with visual, audible and vibrating alerts. On its face, seven LED indicators clearly differentiate between key voltage levels: 24, 120, 208, 240, 277, 480, 600 V AC; and 6, 12, 24, 36, 48,110, 220 V DC.
What’s special about it
To increase accuracy and speed, the VPC-12 turns on when a complete circuit is sensed, automatically select AC or DC voltage or continuity mode, and auto-off when removed from a circuit. Measuring under 6 inches long and weighing less than half a pound, its rugged, compact design allow for easy one-handed use. With an operating battery life of 40 hours and operating temperature ranging from 41 degrees F to 140 degrees F, this tool is just as rugged and reliable as it is safe.
How safe is it?
As is expected from an Amprobe tool, it brings the highest standard of safety to professional electricians, appliance technicians and home owners working in CAT IV 600 V environments. The VPC-12: complies with the requirements of relevant European health, safety and environmental protection legislation; complies with the applicable technical standards for Electromagnetic Compatibility (EMC); and has been independently certified by CSR for US and Canadian Markets. In CAT IV environments, use the test probes with the probe cap on. This decreases the exposed probe tip to reduce the possibility of arc flash from short circuits. When the probe cap is off, the probe tip is 18 mm and rated to CAT II 1000 V.
What’s the difference between VPC-10A and VPC-12?
With the VPC-12, a vibrating alert indicates the presence of continuity as well as dangerous voltage levels, in additional to the visual and audible alerts mentioned above. This is especially helpful when wearing thick PPE gloves and working in a noisy environment. The VPC-12 includes VolTect™ Non-contact Voltage Detection, an added level of safety when working with high voltage levels in an industrial setting. A built-in light makes working in dimly-lit areas possible with the VPC-12.

Ngoài cung cấp Thiết bị kiểm tra điện áp và thông mạch Amprobe VPC-12 công ty chung tôi còn cung cấp đa dạng các dòng sản phẩm khác có thể kể đến như: