Thiết bị kiểm tra cáp mạng Fluke Network LIQ-100

Giá bán: Liên hệ
Gọi để có giá tốt
  • Sales Engineer - Mr. Minh Quang: 0859.788.333
  • Sales Engineer - Mr Quân: 0972.124.827
  • Sales Engineer - Mr. Văn Hải: 0901.82.00.11
  • Hỗ trợ kỹ thuật: 0367.509.634
Lợi ích mua hàng

✔️Sản phẩm chính hãng 100% 
✔️Giá luôn tốt nhất
✔️Tư vấn chuyên nghiệp chuyên sâu
✔️Giao hàng tận nơi trên toàn quốc 
✔️Bảo hành & sửa chữa tận tâm

  • CÔNG TY TNHH TM VÀ CÔNG NGHỆ QTECH - HÀ NỘI OFFICE

    Số 4, ngõ 32, tổ 13, phố Sài Đồng, Phường Phúc Lợi, TP Hà Nội

    HỒ CHÍ MINH OFFICE

    Số 32 đường TL57, Phường Thạnh Lộc, Quận 12, TP HCM

    Hotline: 0859.788.333 - 0972.124.827

Nội dung bài viết

    Chi tiết

    Máy kiểm tra Fluke Networks LIQ-100 - LinkIQ Cable and Network Tester FLUKE LIQ-100

    - Xác thực hiệu suất cáp đến 10GBASE-T qua các phép đo dựa trên tần số.
    - Có tốc độ dữ liệu thiết bị chuyển mạch được kết nối, tên thiết bị chuyển mạch, số cổng và VLAN.
    - Phát hiện cấp PoE (1-8) và công suất và thực hiện kiểm tra tải.
    - Thực hiện chẩn đoán cáp bao gồm chiều dài.
    - Quản lý kết quả và in báo cáo từ máy tính qua phần mềm LinkWare™.

    Máy test cáp mạng Fluke Network LIQ-100
    Máy test cáp mạng Fluke Network LIQ-100

    Thiết bị kiểm tra cáp mạng LIQ-100 Fluke Networks

    General Specifications Fluke Networks LIQ-100
    Languages supported in UI English (SW v1.0)
    Weight 1 lbs 6 oz (624g)
    Battery Type: Lithium-ion, 3.6 V, 6400 mAh;
    Life: 8 hours typical;
    Charge time: 4.5 hours;
    Charging temperature range: 0 °C to +40 °C
    Power Adapter Input: 100 to 240 VAC ±10%, 50/60Hz;
    Output: 15 VDC, 2 A maximum;
    Class II
    Host Interface USB type C
    Display 800 x 480 color capacitive multi-touch
    Dimensions 8.5 in x 4.5 in
    Operating Temperature 0°C to 45°C
    Storage Temperature -20°C to 50°C (-4°F to 122°F)
    Operating Relative Humidity 0 % to 90 %, 0°C to 35°C;
    0 % to 70 %, 35°C to 45°C
    Operating Altitude 4,000 m;
    3,200 m with ac adapter
    Vibration Random, 2 g, 5 Hz-500 Hz
    Drop 1m drop, 6 sides
    Active Network Diagnostics
    Diagnostic Protocols Link Layer Discovery Protocol (LLDP),
    Cisco Discovery Protocol (CDP),
    Fast Link Pulses (FLP)
    Nearest Device Diagnostics, (If available through diagnostic protocols) Switch Name,
    Port Number,
    VLAN Name,
    Advertised Data Rates,
    Advertised Duplex
    Power Over Ethernet Compatibility IEEE 802.3af/at (SW v1.0), Hardware negotiation with signature resistance, Software negotiation with LLDP/CDP
    Power Over Ethernet Diagnostics Advertised Power Class (1 to 4) (SW v1.0), Advertised Available Power, Powered Pairs, Diagnostics for both Single and Dual signatures
    Power Over Ethernet Measurements Loaded Voltage (V), Loaded Power (W)
    Port Blink Blink the light of the connected port
    Cable Test Specifications
    Test Port Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs
    Commissioning Autotests 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only. Test Speed: 6 seconds for lengths < 70 m
    Cable Types Balanced twisted-pair cabling;
    Unshielded twisted-pair;
    Screened twisted-pair;
    2-pair and/or 4-pair
    Wire Map-Only Tests Document wire map,
    Length of each pair,
    Diagnose split pairs,
    User selectable T568A or T568B,
    User selectable crossover settings (Straight through, Halfcrossover, Full-crossover).
    Test speed: 1 second for lengths < 120 m
    Length (Maximum) 305 m
    Nominal Velocity of Propagation (NVP) User settable
    Tone Generator

    Generates digital tones compatible with Fluke Networks IntelliTone probe.
    Generates analog tones compatible with general analog probes.

    Remote ID Locators Use remote ID terminations to identify up to 7 unique ports or office outlets

    Liên hệ mua Fluke LIQ-100 giá tốt !

    • Zalo & Skype: 0859.788.333 - 090.182.0011
    0
    0 Đánh giá
    Bạn đánh giá sao sản phẩm này?
    Đánh giá ngay

    Sản phẩm đã xem